Furniture & Art Repair and Restoration Log
Furniture & Art Repair and Restoration Log
Techniques, tool, tips.... post your furniture repair and refinishing projects here.
Last edited by Ego on Wed Jul 28, 2021 5:50 pm, edited 1 time in total.
Re: Furniture Repair and Refinishing Log
A middle aged woman pulled into the swap meet at 5am in a U-Haul full of her grandmother's possessions. It was dark and she could barely see the things she was dragging from the bed and dropping on the ground. The way she was treating the items told me she wasn't happy to be stuck with the chore. There were only a few people selling that early so I decided to help her unload while illuminating the area with my headlamp. I noticed a table behind a few large boxes and asked the price. She said $5. Without really seeing it I told her I would take it. She made the sign of the cross with the $5 bill.
When I got it home I did a little research. It was made in Sorrento, Italy in the 1880s and the technique is known as Sorrento Inlaid marquetry.
I sanded it by hand with 110 grit sandpaper to remove the old faded finish then went up to 400 grit to finish it smooth. I followed Jacob's advice from my other table project and put a few light coats of tung oil. Nothing more. Came out nice.
I listed it for sale for $1200 and found a spot for it in our home.
When I got it home I did a little research. It was made in Sorrento, Italy in the 1880s and the technique is known as Sorrento Inlaid marquetry.
I sanded it by hand with 110 grit sandpaper to remove the old faded finish then went up to 400 grit to finish it smooth. I followed Jacob's advice from my other table project and put a few light coats of tung oil. Nothing more. Came out nice.
I listed it for sale for $1200 and found a spot for it in our home.
Last edited by Ego on Sat Mar 27, 2021 6:35 pm, edited 1 time in total.
-
- Site Admin
- Posts: 16097
- Joined: Fri Jun 28, 2013 8:38 pm
- Location: USA, Zone 5b, Koppen Dfa, Elev. 620ft, Walkscore 77
- Contact:
Re: Furniture Repair and Refinishing Log
Eh, this could be between $500 and $5000 or more... stop touching it!
Re: Furniture Repair and Refinishing Log
Nice! I love that pouffe too, goes well with the table.
Re: Furniture Repair and Refinishing Log
@jacob, I couldn't help myself. I started the thread because I wasn't sure whether to leave it as is or give it just a little TLC. Maybe I should have waited for advice before proceeding. I figured it was 50/50 chance the person who buys it will be an antique stickler who will be disappointed with my work vs the person buying for their home who would not have bought had it not been "nice". We shall see. There is a lotta stimmy money floating around right now so I hope someone who views the listing decides they've got to have it now.
@chenda, Mrs. Ego has wanted one for years and found it deflated at a thrift store. I believe it is camel leather. It gets filled with winter/summer clothing as the seasons change.
@chenda, Mrs. Ego has wanted one for years and found it deflated at a thrift store. I believe it is camel leather. It gets filled with winter/summer clothing as the seasons change.
Last edited by Ego on Sat Mar 27, 2021 9:44 pm, edited 1 time in total.
- Alphaville
- Posts: 3611
- Joined: Thu Oct 03, 2019 10:50 am
- Location: Quarantined
Re: Furniture Repair and Refinishing Log
@ego ah nice, good idea using it for seasonal storage. Looks like a nice place you have there.
-
- Posts: 806
- Joined: Fri Feb 01, 2019 8:40 pm
Re: Furniture Repair and Refinishing Log
Wow! That table is gorgeous after you cleaned it up. I would have never thought it could look so nice had I seen only the first picture.
Re: Furniture Repair and Refinishing Log
I've been talking with two potential buyers for the table. One has offered $500. I countered with $750.
I have a few new projects in the development stages. One will require a good power stapler and a good sewing machine so I have been watching for them at the swap meet. I told my friends to watch for them. One guy buys video games, another buys antique knives and a third buys RC cars. I started texted them when I see things I know they'd be interested in and they are now returning the favor.
I have a few new projects in the development stages. One will require a good power stapler and a good sewing machine so I have been watching for them at the swap meet. I told my friends to watch for them. One guy buys video games, another buys antique knives and a third buys RC cars. I started texted them when I see things I know they'd be interested in and they are now returning the favor.
Re: Furniture Repair and Refinishing Log
My chair is in need of reupholster. It is from the fifties and came with industrial strength plastic material that lasted sixty-some years. It is starting to crack.
Today one of my friends showed up with a truckload of leather scraps and some full size pieces. He sold me this large piece of black leather for $30. It should be enough to cover the chair. I have not yet decided on whether to use the simply pull, tuck and staple technique or to do a more detailed refinish that requires sewing.
Today one of my friends showed up with a truckload of leather scraps and some full size pieces. He sold me this large piece of black leather for $30. It should be enough to cover the chair. I have not yet decided on whether to use the simply pull, tuck and staple technique or to do a more detailed refinish that requires sewing.
Re: Furniture Repair and Refinishing Log
Scratch that. Mrs. Ego got home and vetoed the black leather. I will have to sell it online. Oh well.
Re: Furniture Repair and Refinishing Log
Bought a new project this morning for $10. I intend to do a very light sanding and refinish then flip it.
Furniture & Art Repair and Restoration Log
Several months ago I bought a painting for a few dollars that looked promising. Signed J.A.F. 1868. After a little research I learned that it is a reproduction or replica of The Death of Chatterton by Henry Wallis. J.A.F might be John Anster Fitzgerald who was painting in London at the time but his later paintings show a different signature. It is well done and has a nice frame but the painting is covered in grime. So I started researching conservation techniques and stumbled upon Baumgartner Restoration.
https://www.youtube.com/c/BaumgartnerRestoration/videos
For starters I gently cleaned some of the varnish off of the painting with turpentine which brightened it up a bit. I will be looking for supplies and tools at the swap meet that I will need to complete the restoration. I believe the next step will be to remove it from the stretcher bars and humidify it so that it flattens. This is a long term project that will almost certainly be worth very little when complete. But it is fun. Mrs. Ego has always wanted to do fine art restoration, so we will work on together. She has way better attention to detail than I, so she will be responsible for the actual application of paint.
https://www.youtube.com/c/BaumgartnerRestoration/videos
For starters I gently cleaned some of the varnish off of the painting with turpentine which brightened it up a bit. I will be looking for supplies and tools at the swap meet that I will need to complete the restoration. I believe the next step will be to remove it from the stretcher bars and humidify it so that it flattens. This is a long term project that will almost certainly be worth very little when complete. But it is fun. Mrs. Ego has always wanted to do fine art restoration, so we will work on together. She has way better attention to detail than I, so she will be responsible for the actual application of paint.
Re: Furniture & Art Repair and Restoration Log
I bought some heat activated fabric tape to repair the holes on the canvas. One of the tenants threw out very nice shades made from a canvas material that I can use to reinforce the edges of the canvas like he does here.... https://youtu.be/uFGLpt_r90E?t=1535
But first things first. I have to remove it from the stretcher and flatten it. I don't have a heat table like he uses so I'll have to make due with an iron.
Oh, I also finished the table above. It came out good. Someone came to see it a few days ago but did not buy it.
But first things first. I have to remove it from the stretcher and flatten it. I don't have a heat table like he uses so I'll have to make due with an iron.
Oh, I also finished the table above. It came out good. Someone came to see it a few days ago but did not buy it.
Re: Furniture & Art Repair and Restoration Log
I realized I never mentioned how I refinished the table. I did a very light sanding to remove the top layer of lacquer and then gave it a light coat of Danish oil. Nothing more. Total time was about 30 minutes.
Today the table sold along with the woodblock print below (paid $5) for $200 total. The person asked if I would deliver them. They lived 7 minutes from my building so I agreed on the condition that they do not negotiate. It went well.
Today the table sold along with the woodblock print below (paid $5) for $200 total. The person asked if I would deliver them. They lived 7 minutes from my building so I agreed on the condition that they do not negotiate. It went well.
-
- Posts: 265
- Joined: Thu Jan 07, 2021 7:45 pm
Re: Furniture & Art Repair and Restoration Log
Nice work, Ego.
IMHO Watco oil is the best finish there is. People usually like to touch something that’s been handmade of wood. Watco let’s the grain and beauty of the wood come through, without a “plastic” coating, so you can feel the wood.
I’ve never tried lacquer or French polishing - those also yield beautiful results for some applications.
IMHO Watco oil is the best finish there is. People usually like to touch something that’s been handmade of wood. Watco let’s the grain and beauty of the wood come through, without a “plastic” coating, so you can feel the wood.
I’ve never tried lacquer or French polishing - those also yield beautiful results for some applications.
Re: Furniture & Art Repair and Restoration Log
Watco oil. Good tip. I will watch for it at the swap meet. Thanks!
-
- Site Admin
- Posts: 16097
- Joined: Fri Jun 28, 2013 8:38 pm
- Location: USA, Zone 5b, Koppen Dfa, Elev. 620ft, Walkscore 77
- Contact:
Re: Furniture & Art Repair and Restoration Log
It's also called tung oil or Danish oil (these are slight mixtures of each other but mostly work the same way). We've talked about it before. Make sure to check the viscosity because it tends to congeal [in the can] with time. It's still usable as long as it's liquidy... if it's not gelled up, you can try to revive/thin old oil with mineral spirits or turpentine.
Re: Furniture & Art Repair and Restoration Log
Ah. Learned something new. I've got a can of Danish oil and a can marked tung oil so I guess I've got that covered. The stuff in the can marked tung oil is thicker so I will have to thin it as you've suggested. Good to know. Thanks!
Last night someone messaged me about a 100 year old painting I've had listed for a while now and completely forgot about. It has some holes and needs restoration so it will be my next project after I get moving on the one above.
Last night someone messaged me about a 100 year old painting I've had listed for a while now and completely forgot about. It has some holes and needs restoration so it will be my next project after I get moving on the one above.
Re: Furniture & Art Repair and Restoration Log
Note that there is a difference between tung oil and tung oil *finishes*. Love the log Ego thanks for sharing! I’m inspired by your projects.