Water storage container repair

What skills to learn, what tools to get
Post Reply
Myakka
Posts: 69
Joined: Thu Sep 13, 2012 3:39 am

Water storage container repair

Post by Myakka » Sat Apr 08, 2017 1:37 pm

A few years ago I had installed some large plastic containers which collect water from my roof.
Now one of them has a hole in it -- like someone forced a nail in the side closer to the bottom of the container than to the top. Bit by bit it is growing bigger.

How do I fix it? Do you know or know of somewhere I can look?

OTCW
Posts: 264
Joined: Thu Mar 31, 2011 12:55 am

Re: Water storage container repair

Post by OTCW » Sat Apr 08, 2017 2:19 pm

Any patch is best done from the inside, so water pressure pushes the patch against the container wall instead of away from it. If that isn't posdible, I'd try to gorilla glue a pladtic patch on the outside. If posdible I'd do the same from the inside. Rough up the patch and container with sandpaper before gluing.

User avatar
Gilberto de Piento
Posts: 855
Joined: Tue Nov 12, 2013 10:23 pm

Re: Water storage container repair

Post by Gilberto de Piento » Sat Apr 08, 2017 8:31 pm

You could look into plastic welding.

halfmoon
Posts: 566
Joined: Mon Nov 07, 2016 10:19 pm

Re: Water storage container repair

Post by halfmoon » Sun Apr 09, 2017 7:56 am

+1 to plastic welding. DH fixed a hole in one of our tanks that way, but you need to do it before the hole gets too large. Lots of instructions and videos online.

Post Reply