Help a Noob Build a Bike
Re: Help a Noob Build a Bike
Seems like only a few millimeters. Don't have it near me but around 5mm I'd guess. I found a pipe cutter online for $18. Maybe I can cut off the affected strip and bring it in for reaming and facing? Or should I just try to have all of that material faced off and forego the pipe cutter? There are tons of bike shops in my area so chances are I can find one willing to charge me for the service. Many of them will let you use their tools in their workspace for cheap or free, as well.
-
- Posts: 1950
- Joined: Tue Nov 12, 2013 10:23 pm
Re: Help a Noob Build a Bike
I'd skip the pipe cutter and ask some shops if the reamer/facer will do it. You may find someone who has addressed this issue before.
You might also try posting this issue on a bike forum for more opinions.
You might also try posting this issue on a bike forum for more opinions.
-
- Posts: 1240
- Joined: Thu Feb 12, 2015 2:14 pm
- Location: Falls City, OR
Re: Help a Noob Build a Bike
I agree with the pipe expander idea, if you can find one that will go down to that small of a diameter. They are made for exhaust pipes, to make it easier to fit mufflers and stuff on.